Chrysler 2005-07 300 2007-09 Aspen remote control car remote key Kobdt04a

KEY FOB REPLACEMENT: Replace your lost or broken remote car key quickly and easily with the Keyless2Go remote key fob
PROGRAMMING: If you have 2 working original keys you will be able to program these remote key from home with easy to follow instructions; otherwise all 2011-2016 key blades will require cutting by a qualified locksmith or dealer. Check the below description for more information.
FITMENT: This keyless entry remote is compatible with a wide range of vehicles from Chrysle, that use 4 Button OHT692427AA; check the vehicle fitment tool above and description for exact match.
PART NUMBERS: This remote car key works as a replacement for remote keys with FCC ID: OHT692713AA OHT692427AA
PRE-TESTED: Each remote car key replacement comes complete with batteries and has been pre-tested to ensure quality and functionality
Compatible with:

2011-2014 Chrysler 200

2005-2007 Chrysler 300, 300C, 300M

2007-2009 Chrysler Aspen

2006-2010 Chrysler PT Cruiser

2007-2009 Chrysler Sebring

1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then turnignition to OFF and remove key.

2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.

3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs programming iscompleted.

4. For each additional key you must repeat these steps starting with step number 1.

Previous post Next post

0 comments