2005 Jaguar XJR Key Fob Remote Programming Instructions

Here are the programming instructions for a 2005 Jaguar XJR Key Fob Remote. If you need an extra Key Fob or Replacement Fob for any vehicle you might have to visit us at https://heart-horse.com/ You can also leave comments or suggestions at the bottom of this blog and if you like what we provide please forward on to your friends & family

NOTE: When carrying out steps 4 to 6, all current transmitters will be erased from memory. Ensure all transmitters to be programmed are available before proceeding.

NOTE: If at any stage two chirps are emitted, then an error has occurred, if this is the case, the process has to be repeated from step 1. When carrying out steps 1 to 7, ensure no other transmitters are operated within range of the system.

1 . Open driver door (door must be open throughout the programming process).

2 . Pull directional indicator stalk to headlight flash position and hold.

3 . Insert ignition key and turn to auxiliary position (position 1), then release the directional indicator stalk.

4 . Flash headlights five times (acknowledge chirp from sounder, and the PATS LED will flash once).

5 . NOTE: Up to five transmitters can be programmed. Push the second transmitter button directly after programming the first, etc. Do not repeat the complete sequence as the first transmitter will be erased.
Push any transmitter button (acknowledge chirp from sounder, and the PATS LED will flash once).

6 . Turn 'OFF' the ignition and remove the key, (acknowledge chirp from sounder, and the PATS LED will flash once).

7 . Close driver door and check transmitter(s) functions

Previous post Next post

0 comments